Pin Assignments - Funkwerk W1002 Manual

6 Technical data
34
3 RESET
4 ETH1/PoE and
ETH2
5 ANT3
ANT1/ANT2

6.1.5 Pin Assignments

6.1.5.1 Ethernet interface
Your device has two Ethernet interfaces. These are used to connect individual PCs or other
switches.
The connection is made via an RJ45 socket.
Fig. 16: Ethernet 10/100 Base-T interface (RJ45 socket)
The pin assignment for the Ethernet 10/100 Base-T interface (RJ45 socket) is as follows:
RJ45 socket for LAN connection
Pin
1
2
3
4
Funkwerk Enterprise Communications GmbH
Reset button
10/100 Base-T Ethernet interface
Connections for screwing on the external antennas
ANT3 = RX3
Top (Fig.)
Connections for screwing on the external antennas
ANT1 = TX/RX1 (Connection of first directional antenna)
ANT2 = TX/RX2 (Connection of second option directional an-
tenna)
Function Eth1 - PoE
TD +/Power
TD -/Power
RD +/Power
Power
bintec W1002/W1002n/W2002/WIx040/WIx065
Function Eth 2
TD +
TD -
RD +
Not used