Address List - Funkwerk W1002 Manual

Funkwerk Enterprise Communications GmbH
bintec W1002/W1002n/W2002/WIx040/WIx065

15.3.1 Address list

In the Firewall -> Addresses -> Address List menu, a list of all configured addresses is
shown.
15.3.1.1 New
Choose the New button to set up new addresses.
Firewall Addresses
Fig. 121: ->
The Firewall->Addresses->Address List->New menu consists of the following fields:
Fields in the Address List Basic Parameters menu
Field
Description
Address Type
Address / Subnet
Address List New
-> ->
Description
Enter the desired description of the address.
Select the type of address you want to specify.
Possible values:
• Address / Subnet (default value): Enter an IP address
with subnet mask.
• Address Range: Enter an IP address range with a start and
end address.
Only if Address Type = Address / Subnet
15 Firewall
285