Funkwerk Enterprise Communications GmbH
bintec W1002/W1002n/W2002/WIx040/WIx065
Field
ing
SNMP Trap UDP Port
SNMP Trap Community
18.4.2 SNMP Trap Hosts
In this menu, you specify the IP addresses to which your device is to send the SNMP traps.
In the External Reporting -> SNMP -> SNMP Trap Hosts menu, a list of all configured
SNMP trap hosts is shown.
18.4.2.1 New
Choose the New button to set up new SNMP trap hosts.
Description
Your device then sends SNMP traps to the LAN's broadcast ad-
dress.
The function is activated by choosing Enabled.
The function is disabled by default.
Only if SNMP Trap Broadcasting is enabled.
Enter the number of the UDP port to which your device is to
send SNMP traps.
Any whole number is possible.
The default value is 162.
Only if SNMP Trap Broadcasting is enabled.
Enter a new SNMP code. This must be sent by the SNMP Man-
ager with every SNMP request so that this is accepted by your
device.
A character string of between 0 and 255 characters is possible
here.
The default value is SNMP Trap.
18 External Reporting
349