Chapter 9 Physical Interfaces; Ethernet Ports; Port Configuration - Funkwerk W1002 Manual

9 Physical interfaces
118

Chapter 9 Physical interfaces

9.1 Ethernet Ports

An Ethernet interface is a physical interface for connection to the local network or external
networks.
Note
In the ex works state, the Ethernet ports ETH1 and ETH2 are assigned to the standard
bridge group br0, which is configured as DHCP client and with the fallback IP ad-
dress 192.168.0.252 and Netmask 255.255.255.0.

9.1.1 Port Configuration

Your device allows you to configure the two Ethernet interfaces separately.
Physical Interfaces
Fig. 53:
The Physical Interfaces -> Ethernet Ports -> Port Configuration menu consists of the
following fields:
Fields in menu Port Configuration
Field
Port
Funkwerk Enterprise Communications GmbH
Ethernet Ports Port Configuration
-> ->
Description
Shows the respective port. The numbering corresponds to the
bintec W1002/W1002n/W2002/WIx040/WIx065