Vlans - Funkwerk W1002 Manual

Funkwerk Enterprise Communications GmbH
bintec W1002/W1002n/W2002/WIx040/WIx065
Caution
For interfaces that operate in Routing mode, you only assign a VLAN ID to the inter-
face. You define this via the parameter Interface Mode = VLAN and the VLAN ID field
in the LAN -> IP Configuration ->Interfaces->New menu.

10.2.1 VLANs

In this menu, you can display all the VLANs already configured, edit your settings and cre-
ate new VLANs.
By default, the Management VLAN is available, to which all interfaces are assigned.
10.2.1.1 Edit/New
Choose the icon to edit existing entries. Choose the New button to configure other
VLANs.
LAN VLAN VLANs
Fig. 59: -> ->
The LAN->VLAN->VLANs->Edit/New menu consists of the following fields:
Fields in the VLANs Configure VLAN menu
Field
VLAN Identifier
Edit/New
->
Description
Enter the number that identifies the VLAN. In the Edit menu,
you can no longer change this value. Possible values are 1 to
4094.
10 LAN
131