Funkwerk Enterprise Communications GmbH
bintec W1002/W1002n/W2002/WIx040/WIx065
Field
#
Interface
Back Route Verify
Fields in the Options General menu
Field
Allow deleting/editing all
routing entries
12.2 NAT
Description
Possible values:
• Enable for all Interfaces: Back Route Verify is activ-
ated for all interfaces.
• Enable for Specific Interfaces (default value): A
list of all interfaces is displayed in which Back Route Verify is
only enabled for specific interfaces.
• Disable for all Interfaces: Back Route Verify is dis-
abled for all interfaces.
Only for Mode = Enable for specific interfaces
The serial number of the list entry is displayed here.
Only for Mode = Enable for Specific Interfaces.
The name of the interface is displayed here.
Only for Mode = Enable for Specific Interfaces.
Select whether Back Route Verify is to be activated for this in-
terface.
The function is activated with Enabled.
By default, the function is deactivated for all interfaces.
Description
Define whether all the routes entered on your device can be ed-
ited and deleted in the Routing -> Routes -> Routes menu.
The function is activated with Enabled.
By default, the function is deactivated for all interfaces.
12 Routing
183