Wds Links - Funkwerk W1002 Manual

11 Wireless LAN
160
Field
Preshared Key
Fields in the menu MAC Filter
Field
ACL Mode
Allowed Addresses

11.1.3 WDS Links

If you operate your device in access point mode (Wireless LAN->WLANx-> Radio Set-
tings-> ->Operation Mode = Access Point), you can set up and edit the desired
WDS links in the Wireless LAN->WLANx->WDS Links->
Important
Select the channel to be used. The WDS link can only be configured in the 2.4 GHz
band if the channel is NOT Auto.
The number of channels you can selected depends on the country setting. Please consult
Funkwerk Enterprise Communications GmbH
Description
Select which encryption method should be used.
Possible values:
• TKIP (default value): Temporal Key Integrity Protocol.
• AES: Advanced Encryption Standard.
• AES and TKIP
Both encryption methods are rated as secure, with AES offering
better performance.
Only if Security Mode = WPA-PSK
Enter the WPA password.
Enter an ASCII string with 8 - 63 characters.
Description
Select whether only certain clients are to be permitted for this
wireless network.
The function is activated by choosing Enabled.
The function is disabled by default.
Use Add here to make entries and enter the MAC addresses
(MAC Address) of the clients to be permitted.
bintec W1002/W1002n/W2002/WIx040/WIx065
->/New menu.