Pin Assignments - Funkwerk W1002 Manual

Funkwerk Enterprise Communications GmbH
bintec W1002/W1002n/W2002/WIx040/WIx065

6.2.5 Pin Assignments

6.2.5.1 Ethernet interface
Your device has two Ethernet interfaces. These are used to connect individual PCs or other
switches.
The connection is made via an RJ45 socket.
Fig. 21: Ethernet 10/100 Base-T interface (RJ45 socket)
The pin assignment for the Ethernet 10/100 Base-T interface (RJ45 socket) is as follows:
RJ45 socket for LAN connection
Pin
1
2
3
4
5
6
7
8
6.2.5.2 Serial Interface
Your device has a Serial interface for connection to a console. This supports Baud rates
from 1200 to 115200 Bps.
The interface is designed as a 9-pin SUB-D socket.
Fig. 22: 9-pin Sub-D connector
Function Eth1 - PoE
TD +/Power
TD -/Power
RD +/Power
Power
Power
RD -/Power
Power
Power
6 Technical data
Function Eth 2
TD +
TD -
RD +
Not used
Not used
RD -
Not used
Not used
43