Groups - Funkwerk W1002 Manual

15 Firewall
286
Field
Address Range

15.3.2 Groups

In the Firewall -> Addresses -> Groups menu, a list of all configured address groups is
shown.
You can group together addresses. This makes it easier to configure firewall rules.
15.3.2.1 New
Choose the New button to set up new address groups.
Firewall Addresses
Fig. 122: ->
The Firewall->Addresses->Groups->New menu consists of the following fields:
Fields in the Groups Basic Parameters menu
Funkwerk Enterprise Communications GmbH
Description
Enter the IP address of the host or a network address and the
related netmask.
The default value is 0.0.0.0.
Only if Address Type = Address Range
Enter the start and end IP address of the range.
Groups New
-> ->
bintec W1002/W1002n/W2002/WIx040/WIx065