Panasonic KX-NS500 Pc Programming Manual page 447

Value Range
60 ´ n (n = 0–60) s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
Feature Guide References
2.14.2 Conference
Unattended Conference—Warning Tone Start Timer (s)
Specifies the length of time until the parties involved in an Unattended Conference receive a warning tone after
the conference originator receives the Unattended Conference Recall tone but does not return to the
conference.
Value Range
0–240 s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
Feature Guide References
2.14.2 Conference
Unattended Conference—Disconnect Timer (s)
Specifies the length of time until an Unattended Conference is disconnected after the parties involved in the
conference receive a warning tone but the conference originator does not return to the conference.
Value Range
0–240 s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
Feature Guide References
2.14.2 Conference
Miscellaneous
Caller ID—Waiting to receive (s)
Specifies the length of time that the PBX waits to receive Caller ID from an analogue trunk. If the Caller ID is
received through an analogue trunk card on which no Caller ID card is mounted or through a port to which
Caller ID Detection is disabled, this timer is not applicable.
10.3 PBX Configuration—[2-3] System—Timers & Counters
PC Programming Manual 447