Panasonic KX-NS500 Pc Programming Manual page 388

9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS,
AOC-D, AOC-E, E911, 3PTY
Specifies whether each ISDN or QSIG supplementary service is used.
The available services depend on the setting of
Value Range
For COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E, E911:
No, Yes
For 3PTY:
No, Yes-3Pty
Maintenance Console Location
9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
Feature Guide References
4.1.2.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
4.1.2.3 Advice of Charge (AOC)
4.1.2.4 Call Forwarding (CF)—by ISDN (P-P)
4.1.2.6 Call Transfer (CT)—by ISDN
4.1.2.7 Three-party Conference (3PTY)—by ISDN
4.1.2.9 Completion of Calls to Busy Subscriber (CCBS)
4.2.4.2 Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected Name
Identification Presentation (CNIP/CONP)—by QSIG
4.2.4.3 Call Forwarding (CF)—by QSIG
4.2.4.4 Call Transfer (CT)—by QSIG
4.2.4.5 Completion of Calls to Busy Subscriber (CCBS)—by QSIG
CCBS Type
Selects the type of call from the network initiated by the CCBS (Completion of Calls to Busy Subscriber) feature,
from which the specified number of digits are deleted.
CCBS Delete Digits on this screen specifies the number of digits to delete from the received number.
Value Range
ALL, Unknown, International, National, Network specific, Subscriber, Abbreviated
Maintenance Console Location
9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
388 PC Programming Manual
Port Type on this screen.