Panasonic KX-NS500 Pc Programming Manual page 535

Feature Guide References
2.2.2.3 Outside Destinations in Incoming Call Distribution Group
4.1.2.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
4.2.6 Network ICD Group
System Wireless—Out of Range Registration
Selects whether the PBX can set the status of a PS to Out of Range if no signal is received from the PS for a
preset length of time. This feature must be enabled to allow PS roaming.
Value Range
Disable, Enable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—
(s)
Feature Guide References
4.2.6.1 PS Roaming by Network ICD Group
System Wireless—SDN Delayed Ringing with LCD
Selects whether call information (such as Caller ID) is shown on the display of a PDN extension PS (i.e., a PS
with one or more PDN buttons) when a call is received while delayed ringing is set.
Value Range
Disable, Enable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
PC Programming Manual References
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button—
(for SDN)
Feature Guide References
2.9.1 Primary Directory Number (PDN)/Secondary Directory Number (SDN) Extension
Transfer—Automatic Answer for Transferred Call
Enables transferred calls (including direct extension calls) to be automatically answered, when using the
Hands-free Answerback feature.
10.9 PBX Configuration—[2-9] System—System Options
System Wireless—PS Out of Range Timer
Parameter Selection
PC Programming Manual 535