Panasonic KX-NS500 Pc Programming Manual page 185

Value Range
Inband, Outband (RFC2833), Outband (H.245)
Maintenance Console Location
9.2.1 PBX Configuration—[1-1] Configuration—Slot—System Property—Main
Payload Type
Specifies the payload type for DTMF tones using RFC2833. Programming this parameter is only necessary if
DTMF is set to Outband (RFC2833).
Value Range
96–127
Maintenance Console Location
9.2.1 PBX Configuration—[1-1] Configuration—Slot—System Property—Main
V-IPGW–GW Settings–Option 3
GW Name
Specifies the name of the destination gateway device for programming reference.
Value Range
Max. 20 characters
Maintenance Console Location
9.2.1 PBX Configuration—[1-1] Configuration—Slot—System Property—Main
T38 FAX Max Datagram
Specifies the maximum datagram size when using the T.38 protocol.
Value Range
272–512
Maintenance Console Location
9.2.1 PBX Configuration—[1-1] Configuration—Slot—System Property—Main
T38 FAX UDPTL Error Correction – Redundancy
Specifies whether to enable the redundancy feature when using the T.38 protocol.
Value Range
Disable, Enable
9.2.1 PBX Configuration—[1-1] Configuration—Slot—System Property—Main
PC Programming Manual 185