Panasonic KX-NS500 Pc Programming Manual page 443

DISA—Disconnect Timer after Intercept (s)
Specifies the length of time that an intercepted DISA call rings at the intercept routing destination before being
disconnected.
Value Range
0–60 s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
PC Programming Manual References
13.3.2 PBX Configuration—[5-3-2] Optional Device—Voice Message—DISA Message
Feature Guide References
2.16.1 Direct Inward System Access (DISA)
DISA—CO-to-CO Call Prolong Counter
Specifies the number of times that the caller can prolong a trunk-to-trunk call on a DISA line. (Selecting "0"
enables the caller to prolong the trunk-to-trunk call without restriction.)
Value Range
0–15
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
PC Programming Manual References
13.3.2 PBX Configuration—[5-3-2] Optional Device—Voice Message—DISA Message
Feature Guide References
2.16.1 Direct Inward System Access (DISA)
DISA—CO-to-CO Call Prolong Time (x60s)
Specifies the length of time that a trunk-to-trunk call on a DISA line is prolonged each time that the caller
prolongs the call. (Selecting "0" prevents the caller from prolonging the trunk-to-trunk call.)
Value Range
60 ´ n (n = 0–7) s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
10.3 PBX Configuration—[2-3] System—Timers & Counters
PC Programming Manual 443