Panasonic KX-NS500 Pc Programming Manual page 965

the time specified in
Parameters/MSW Notification. If the transferred party does not answer the call within this time, the system
considers it as a No Answer call.
Analyze: The system monitors the status of the trunk, recognises that the destination party goes off-hook, and
connects the line.
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Feature Guide References
3.2.1.7 Call Transfer to Outside
Trunk Group (1–64)—Trunk Group No.
Specifies a trunk group for making settings for EFA Transfer, Caller ID Callback, and Outside Line Access
Sequence for Caller ID Callback. Selecting different trunk groups from this drop-down list allows settings to be
made for each trunk group.
Value Range
1–64
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Trunk Group (1–64)—EFA Transfer
Specifies whether or not the system uses EFA (External Feature Access) when transferring incoming trunk
calls to another trunk. If set to "Enable", the system transfers incoming trunk calls to another trunk according
to "EFA Transfer Sequence" specified in "Transfer to Outside". If set to "Disable", the system transfers incoming
trunks calls to another trunk according to
Sequence (Up to 16 digits / [0-9 * # D F R T , ; N]) specified in Transfer to Outside.
Value Range
Enable, Disable
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Trunk Group (1–64)—Caller ID Callback
Specifies whether or not the system allows a subscriber to call back the party who left a message in his or her
mailbox by using the caller ID information sent from the PBX. This setting applies to the trunk number used
when the message with Caller ID information was left in his or her mailbox.
Value Range
Enable, Disable
Dialling Parameters—Outgoing Call No Answer Time (10-90 s) in Dialling
Outside Transfer Sequence—Call Transfer to Outside
24.4 UM Configuration—[5-4] System Parameters—Parameters
PC Programming Manual 965