Panasonic KX-NS500 Pc Programming Manual page 387

Called Party Number—Numbering Plan ID—Public, Private
Selects the numbering plan ID that applies to incoming trunk calls routed through public and private networks.
Value Range
Unknown, ISDN-Telephony, National Standard, Private
Maintenance Console Location
9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
Called Party Number—Type of Number—Public, Private
Selects the type of number that applies to incoming trunk calls routed through public and private networks.
Value Range
Unknown, International, National, Network, Subscriber
Maintenance Console Location
9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
Supplementary Service
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Port Type
Selects the port type.
Note
•
Each ISDN connection in a QSIG network must have a master port on one PBX and a slave port on
another PBX.
•
ISDN extensions can belong to an incoming call distribution group or idle extension hunting group. In
this case, an MSN can be assigned.
Value Range
CO: For connecting to public network
Extension: For connecting to extension
QSIG-Slave: For connecting to private network (slave port)
QSIG-Master: For connecting to private network (master port)
Maintenance Console Location
9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
PC Programming Manual 387