Panasonic KX-NS500 Pc Programming Manual page 266

9.10 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
MEX - Prefix for Incoming
Specifies the Mobile Device Access prefix for incoming calls from MEX-enabled mobile devices.
Value Range
Max. 16 characters
Maintenance Console Location
9.10 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
MEX - Prefix for Outgoing
Specifies the Mobile Device Access outgoing prefix for calls made to MEX-enabled mobile devices.
Value Range
Max. 16 characters
Maintenance Console Location
9.10 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
MEX - Additional Dial
Specifies additional digits to be inserted before the dialled number of an incoming call from a MEX-enabled
mobile device.
Value Range
Max. 7 digits (consisting of 0–9, *, and #)
Maintenance Console Location
9.10 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
Voice/FAX
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
266 PC Programming Manual