Remaining Number of Digits
Specifies the number of digits to be dialled following the leading number to access the destination.
Value Range
0–29
Maintenance Console Location
9.2.1 PBX Configuration—[1-1] Configuration—Slot—System Property—Main
GW No./GW Group Selection
Specifies the type of destination when making calls: a gateway device or a gateway group.
Value Range
GW Group, GW No.
Maintenance Console Location
9.2.1 PBX Configuration—[1-1] Configuration—Slot—System Property—Main
GW Group
Specifies the number of the destination gateway group. This setting is only available when GW No./GW Group
Selection on this screen is set to GW Group.
Value Range
1–256
Maintenance Console Location
9.2.1 PBX Configuration—[1-1] Configuration—Slot—System Property—Main
GW No.
Specifies the number of the destination gateway device. This setting is only available when GW No./GW Group
Selection on this screen is set to GW No..
Value Range
1–512
Maintenance Console Location
9.2.1 PBX Configuration—[1-1] Configuration—Slot—System Property—Main
9.2.1 PBX Configuration—[1-1] Configuration—Slot—System Property—Main
PC Programming Manual
187