Maintenance Console Location
9.10 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
CLIP (Receive)
Specify where caller information about an incoming call is obtained:
•
Prioritised: P-Asserted-Identity®P-Preferred-Identity®From Header
•
Fixed: From Header
Value Range
P-Asserted-Identity Header, From Header
Note
•
To copy values from one location to another, click Copy to.
•
If the Channel Attribute setting of the port is "Additional", the setting cannot be changed.
Maintenance Console Location
9.10 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
CLIR
Specifies whether to allow restriction of the display of the CLIP number on the called party's telephone when
making a SIP trunk call.
Value Range
Yes, No
Maintenance Console Location
9.10 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
CNIP (Send)
Specifies whether to send the caller's name to be displayed on the called party's telephone when making a
SIP trunk call.
Value Range
Yes, No
Maintenance Console Location
9.10 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
CNIP (Receive)
Specifies whether to receive the caller's name to be displayed on the called party's telephone when receiving
a SIP trunk call.
Value Range
Yes, No
9.10 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
PC Programming Manual
277