Panasonic KX-NS500 Pc Programming Manual page 631

DPT (S-DPT): Digital XDP port of DPT port (DLC)
ISDN: ISDN port (PRI)
IP-EXT: IP-Extension port (V-IPEXT)
SIP: General SIP Extension port (V-SIPEXT)
SIP-MLT: KX-UT series SIP phone/S-PS/SIP-CS Extension port (V-UTEXT)
UM: Unified Messaging System Extension port
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
Telephone Type
Indicates the type of telephone connected to the extension port (reference only).
Value Range
DPT (15V)/DPT (40V): DPT is connected.
APT (15V): APT is connected.
DSS: DSS Console is connected.
VM: VPS is connected.
ISDN-Extension: ISDN telephone is connected.
CS: CS is connected.
IP-PT: IP-PT belonging to the V-IPEXT card is connected.
UT: KX-UT series SIP phone is connected.
SIP: General SIP Extension is connected.
S-PS: SIP Portable Station is connected.
SIP-CS: SIP Cell Station is connected.
CS-M: High-density CS is connected with its master port.
CS-S1–3: High-density CS is connected with its slave port.
No Connection: No telephone is connected.
UNKNOWN: SLT is connected (or no telephone is connected to the Super Hybrid or SLT port).
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
User Group
Specifies the extension user group to which the extension belongs. Extension user groups are used to compose
tenants, call pickup groups and paging groups.
Value Range
1–32
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
Feature Guide References
5.1.2 Group
5.1.3 Tenant Service
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
PC Programming Manual 631