Panasonic KX-NS500 Pc Programming Manual page 817

Feature Guide References
2.1.1.2 Direct In Line (DIL)
2.1.1.4 Calling Line Identification (CLI) Distribution
DDI/DID/TIE
For each trunk to which DDI/DID distribution is set, or for each trunk whose
is Private (TIE), modification parameters for DDI/DID number and TIE line call numbers can be programmed.
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Card Type
Indicates the trunk card type (reference only).
Value Range
Card type
Maintenance Console Location
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
Feature Guide References
2.1.1.1 Incoming Trunk Call Features—SUMMARY
Trunk Property
Indicates the networking type of each trunk (reference only).
Value Range
Public, Private(TIE), VPN
Maintenance Console Location
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
Feature Guide References
2.1.1.1 Incoming Trunk Call Features—SUMMARY
4.2.1 TIE Line Service
4.2.3 ISDN Virtual Private Network (ISDN-VPN)
Distribution Method
Selects the distribution method for incoming trunk calls. The value range of this setting depends on the card
type and Trunk Property assigned for each trunk.
Value Range
DIL: Distribution depends on the trunk through which the calls arrive
DDI/DID: Distribution depends on the DDI/DID number of the calls
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
Trunk Property on this screen
PC Programming Manual 817