Panasonic KX-NS500 Pc Programming Manual page 506

10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings
PC Programming Manual References
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main—
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Main—
13.3.2 PBX Configuration—[5-3-2] Optional Device—Voice Message—DISA Message
Feature Guide References
2.16.1 Direct Inward System Access (DISA)
Remote Operation by Other Extension
Allows the Walking COS feature to be used from a remote location (inside the PBX, or outside the PBX using
DISA).
Value Range
Allow, Deny
Maintenance Console Location
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings
PC Programming Manual References
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main—
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Main—
Feature Guide References
2.7.5 Walking COS
Accept Wireless XDP Parallel Mode Set by PS
Allows Wireless XDP Parallel Mode to be set by a PS.
Value Range
Allow, Deny
Maintenance Console Location
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings
PC Programming Manual References
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main—
Feature Guide References
5.2.4.5 Wireless XDP Parallel Mode
506 PC Programming Manual
COS
COS
COS
COS
COS