Pbx Configuration-[1-1] Configuration-Slot-Card Property-E1 Type Line Signal Setting - Panasonic KX-NS500 Pc Programming Manual

9.28 PBX Configuration—[1-1] Configuration—Slot—Card Property—E1 type Line Signal Setting
9.28 PBX Configuration—[1-1]
Configuration—Slot—Card Property—E1 type Line
Signal Setting
DR2 Setting Type
Selects the control type of the DR2 (Digital System R2) signal.
Value Range
Normal, Option 1, Option 3
Maintenance Console Location
9.28 PBX Configuration—[1-1] Configuration—Slot—Card Property—E1 type Line Signal Setting
Inter-digit Timer
Specifies the pseudo-answer time. This setting is available only when Option 1 or Option 3 is selected in DR2
Setting Type on this screen..
Value Range
3-15
Maintenance Console Location
9.28 PBX Configuration—[1-1] Configuration—Slot—Card Property—E1 type Line Signal Setting
Bit Position for Dial Pulse
Selects the position of the pulse dial control bit in a DR2 signal.
Value Range
A-bit, B-bit
Maintenance Console Location
9.28 PBX Configuration—[1-1] Configuration—Slot—Card Property—E1 type Line Signal Setting
Bit Position for Clear Back
Selects the position of the clear-back signal control bit in a DR2 signal.
Value Range
A-bit, B-bit, A&B-bit
Maintenance Console Location
9.28 PBX Configuration—[1-1] Configuration—Slot—Card Property—E1 type Line Signal Setting
PC Programming Manual 393