Pbx Configuration-[3-1-4] Group-Trunk Group-Dialling Plan - Panasonic KX-NS500 Pc Programming Manual

11.1.4 PBX Configuration—[3-1-4] Group—Trunk Group—Dialling Plan
11.1.4 PBX Configuration—[3-1-4] Group—Trunk Group—Dialling
Plan
The PBX sends all of the dialled digits at once after an extension user completes dialling. The PBX can
recognise the end of dialling when the dialled telephone number starts with the programmed leading number
and contains the programmed total number of digits.
When the PBX recognises the end of dialling to an analogue trunk, the PBX cancels the muting of the caller's
voice sent to the analogue trunk immediately. If the PBX cannot recognise the end of dialling, the PBX mutes
the caller's voice sent to an analogue trunk from the time at which the last digit is dialled until the analogue
trunk inter-digit timer expires.
4 tables can be programmed, each with a maximum of 50 leading numbers. Select the table to programme
from the Dialling Plan Table list.
To assign a set of leading numbers automatically, click Auto Assign.
Leading Number
Specifies the leading number to be regarded as the beginning of dialling.
Value Range
Max. 32 digits (consisting of 0–9, *, #, N [2,3,4,5,6,7,8,9], P [0, 1], and X [0–9, *, and #])
Maintenance Console Location
11.1.4 PBX Configuration—[3-1-4] Group—Trunk Group—Dialling Plan
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone—
CO First Digit (s)
10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone—
CO Inter-digit (s)
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings—Main—
Feature Guide References
4.1.2.1 Integrated Services Digital Network (ISDN)—SUMMARY
Removed Number of Digits
Specifies the number of leading digits to be removed from the number dialled by en-bloc dialling.
Value Range
0–15
Maintenance Console Location
11.1.4 PBX Configuration—[3-1-4] Group—Trunk Group—Dialling Plan
Feature Guide References
4.1.2.1 Integrated Services Digital Network (ISDN)—SUMMARY
568 PC Programming Manual
Dial—Analogue
Dial—Analogue
Dialling Plan Table