Logging In To Web Maintenance Console - Panasonic KX-NS500 Pc Programming Manual

2.1.3 Logging in to Web Maintenance Console

After establishing a connection to Web Maintenance Console (see 1.2.1 Starting Web Maintenance
Console), the login window is displayed, and a login name and password must be entered. If this is the first
time to log in to Web Maintenance Console, and the PBX is in its initialised, factory default state, you must log
in using the Installer level account to begin the Easy Setup Wizard (see 2.1.4 Easy Setup Wizard).
For information about account names and passwords, see 2.1.1 Web Maintenance Console Accounts.
Login Restrictions
•
Up to 32 User (User) and User (Administrator) level accounts may log in at one time to Web Maintenance
Console in On-line mode.
•
Only 1 user may log in using the Installer level account at a time. If someone using the Installer level account
is logged in to Web Maintenance Console and is making changes, and another user logs in using the
Installer level account, the user logging in may override the other logged-in user so that programming can
be performed (a warning screen will be displayed for the user that is about to override the currently
logged-in user).
•
Users can view only menus and setting items they may access according to their account level. For User
(Administrator) level accounts, the items that can be viewed can be set by the Installer level account. For
details, see 6.7 Tool—Screen Customise.
•
If two logged-in users change the same setting, the change made last will be the effective setting.
•
If a user attempts to log in, but enters an incorrect password three times, the failure is recorded in the error
log of the PBX and the user may not attempt to log in again for a 5-minute period.
2.1.3 Logging in to Web Maintenance Console
Login Screen
PC Programming Manual 37