Panasonic KX-NS500 Pc Programming Manual page 746

13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System
Maintenance Console Location
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System
DISA Cyclic Tone Option—Tone on Maximum Time (ms)
Specifies the maximum duration of the cyclic tone that will be recognised by the PBX. When the tone sent from
the telephone company is shorter than the value set here, the PBX recognises it as a tone-on.
Note that this option can only be set when
Value Range
10 ´ n (n=11–400) ms
Maintenance Console Location
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System
DISA Cyclic Tone Option—Tone off Maximum Time (ms)
Specifies the maximum time that the PBX waits for a cyclic tone to be sent from the telephone company before
recognising it as a tone-off. When no tone is detected within the time set here, the PBX recognises it as a
tone-off.
Note that this option can only be set when
Value Range
10 ´ n (n=11–400) ms
Maintenance Console Location
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System
DISA Cyclic Tone Option—Repeating Times of ON/OFF for Detection
Specifies the number of times the tone pattern (a set of tone-on and tone-off) must be received to establish
reception of the cyclic tone. This determines the end of call.
Note that this option can only be set when
Value Range
3–16
Maintenance Console Location
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System
Timed Reminder Message—Day, Lunch, Break, Night
Specifies the pre-recorded message to play when a Timed Reminder call is answered in each time mode.
Value Range
None, 1–64
746 PC Programming Manual
DISA Cyclic Tone Detection on this screen is set to "Option".
DISA Cyclic Tone Detection on this screen is set to "Option".
DISA Cyclic Tone Detection on this screen is set to "Option".