Panasonic KX-NS500 Pc Programming Manual page 534

10.9 PBX Configuration—[2-9] System—System Options
Feature Guide References
4.2.1 TIE Line Service
Send CLIP of CO Caller—when call is transferred to CO (CLIP of Held Party)
Enables the transfer of related CLIP information when a party on hold is transferred. When set to "Enable", the
transfer destination will receive the original caller's CLIP information, not the information of the extension that
performed the transfer.
Value Range
Disable, Enable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Guide References
4.1.2.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
Send CLIP of CO Caller—when call is forwarded to CO
Selects whether the CLIP number of the calling party or the CLIP number of the forwarding extension or virtual
PS is sent to the forwarding destination to identify the origin of a trunk call.
Value Range
Disable: The CLIP number assigned to the forwarding extension or virtual PS is sent.
Enable: The CLIP number of the calling party is sent.
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Guide References
2.2.2.3 Outside Destinations in Incoming Call Distribution Group
4.1.2.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
4.2.6 Network ICD Group
Send CLIP of Extension Caller—when call is forwarded to CO
Selects whether the CLIP number of the calling extension or the CLIP number of the forwarding extension or
virtual PS is sent to the forwarding destination to identify the origin of a call.
Value Range
Disable: The CLIP number assigned to the forwarding extension or virtual PS is sent.
Enable: The CLIP number of the calling extension is sent.
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
534 PC Programming Manual