Panasonic KX-NS500 Pc Programming Manual page 333

CS Name
Specifies the CS name of the port.
Value Range
Max. 20 characters
Maintenance Console Location
9.18 PBX Configuration—[1-1] Configuration—Slot—V-IPCS—Port Property
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
9.18 PBX Configuration—[1-1] Configuration—Slot—V-IPCS—Port Property
IP Codec Priority
Specifies the codec used for compression and decompression of transmitted data.
Value Range
G.711, G.729A
Maintenance Console Location
9.18 PBX Configuration—[1-1] Configuration—Slot—V-IPCS—Port Property
Packet Sampling Time (G.711)
Specifies the time interval between measurements (samples) of sound data during a conversation.
The smaller this number, the higher the quality of the transmitted sound.
Value Range
20 ms, 30 ms, 40 ms, 50 ms, 60 ms
Maintenance Console Location
9.18 PBX Configuration—[1-1] Configuration—Slot—V-IPCS—Port Property
Packet Sampling Time (G.729A)
Specifies the time interval between measurements (samples) of sound data during a conversation.
9.18 PBX Configuration—[1-1] Configuration—Slot—V-IPCS—Port Property
PC Programming Manual 333