Pbx Configuration-[3-11] Group-Vm (Dpt) Group; Pbx Configuration-[3-11-1] Group-Vm (Dpt) Group-System Settings - Panasonic KX-NS500 Pc Programming Manual

11.11 PBX Configuration—[3-11] Group—VM (DPT)
Group
11.11.1 PBX Configuration—[3-11-1] Group—VM (DPT)
Group—System Settings
A Panasonic Voice Processing System (VPS) with DPT Integration can be connected to DPT ports of the PBX.
The DPT ports that are connected to the VPS are called a VM (DPT) Group. 2 VM (DPT) Groups can be
programmed.
Call Waiting on VM Group
Enables the queuing of calls when all extension ports of the VM (DPT) group are busy. (Call Waiting tone is
not sent to any VM port.)
Value Range
Disable, Enable
Maintenance Console Location
11.11.1 PBX Configuration—[3-11-1] Group—VM (DPT) Group—System Settings
PC Programming Manual References
9.22 PBX Configuration—[1-1] Configuration—Slot—Extension—Port Property
Feature Guide References
2.2.2.4 Queuing Feature
2.28.1 Voice Mail (VM) Group
Intercept to Mailbox for Call to Extension
Enables the PBX to send the mailbox number of the called extension to the VPS when a call is redirected to
the VM (DPT) group by Intercept Routing. When the VPS receives the mailbox number, the VPS answers the
call with the appropriate mailbox.
Value Range
Disable, Enable
Maintenance Console Location
11.11.1 PBX Configuration—[3-11-1] Group—VM (DPT) Group—System Settings
PC Programming Manual References
9.22 PBX Configuration—[1-1] Configuration—Slot—Extension—Port Property
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Intercept
Destination— Intercept Destination—When called party does not answer—Day, Lunch, Break, Night
11.11.1 PBX Configuration—[3-11-1] Group—VM (DPT) Group—System Settings
PC Programming Manual 613