Teledyne LeCroy
Figure 2.14: Encoded Check Box
Follow MRS Settings
Click on the radio button to turn MRS Settings on or off. This will instruct the Software
and Hardware to follow the settings that are changed via MRS commands on the DIMM
bus, and dynamically adjust certain JEDEC parameters used for error triggering and error
analysis. Once captured, the MRS View will display what the most recent MRS
parameters were at any particular time point in the captured trace.
When Follow MRS Settings is turned on, items which are effected dynamically by MRS
commands are highlighted in green (see Figure 2.15 on page 47).
If Follow MRS Settings is turned off, in MPR state, rd‐rd violations are turned off (Triggers
and SW Violation Analysis) since they could be false errors.
46
Recording Options Setup
K ibra DDR Protocol Analyzer User Manual