Launching Your Kibra 380 or Kibra 480 Software
Note:
It is possible to use more than one Kibra 380 or Kibra 480 System to monitor additional DDR3 or
DDR4 memory channels. Check the box next to all attached Kibra 380 or Kibra 480 in this
window to enable capture from additional analyzers.
1.7.2
About
The Help > About menu option provides current details of the hardware, software,
firmware and bus engine.
Figure 1.16: About DDR Protocol Suite
Note:
In the event the Kibra 380 or Kibra 480 system contains firmware that is down‐rev or not
supported in the installed version of software, the about box will indicate this by showing the
firmware revision number in red (see figure above.) Select Setup > Devices and choose Update
Device to install the firmware supported in the installed version of software.
K ibra DDR Protocol Analyzer User Manual
Teledyne LeCroy
27