Table of Contents
Advertisement
Teledyne LeCroy
Daisy Chaining
To set up the units in a daisy chain:
1. Plug in one end of the CATC Sync cable to the CATC Sync Out connector of one unit,
2. The software will recognize the connections automatically.
Figure 1.8: Daisy Chaining Units using CATC Sync Cable and CATC Connectors
22
and the other end to the CATC Sync in connector of another. To connect another
unit continue this chain (see Figure 1.8).
DDR Interposer
Kibra DDR Protocol Analyzer User Manual
Advertisement
Table of Contents
