Software Menus and Toolbar
K ibra DDR Protocol Analyzer User Manual
Manual Trigger. Click to initiate a manual trigger.
Repeat Upload icon. Click to repeat upload.
Preferences icon. Click to open the Display/View Configuration
dialog (see "Preferences" on page 72).
Hide Deselects/NOPs icon. Hides the captured DES (Deselects)
and NOP command states to remove extra space from the
viewing window. These commands are replaced by a cross‐hatch
pattern, similar to how we represent DES/NOP's that were
filtered in hardware during capture.
Synchronize All Views icon. Click to synchronize the positions of
the currently selected clock value in all views.
Manage Synced Traces icon. Click to synchronize the times
between multiple traces which were captured at the same time
using CATC Sync cable as shown in Figure 1.8 on page 22.
Waveform View icon. Click to display the Waveform View (see
"Waveform View" on page 78).
Listing View icon. Click to display the Listing View (see "Listing
View" on page 79).
Bank State View icon. Click to display the Bank State View (see
"Bank State View" on page 80).
Traffic Summary View icon. Click to display the Traffic Summary
View (see "Traffic Summary" on page 137).
Timing Calculator View icon. Click to display the Timing
Calculator View (see "Waveform View" on page 103).
Last MRS Values View icon. Click to display the MR Values View
(see "Last MRS Values" on page 143).
Row Usage Report icon. Click to display the Row Usage Report
(see " Row Usage Report" on page 144).
Timing Violation Analysis icon. Click to display the Timing
Violation Analysis View (see "Timing Violation Reanalysis" on
page 147).
Trace Information icon. Click to display the Trace Information
dialog.
GoTo Any Time icon. Click to display the GoTo Time dialog (see
"Markers" on page 116).
Goto Trigger icon. Click to go to a trigger (see "Recording Type:
Trigger Mode" on page 38).
T eledyne LeCroy
33