Establish Interface - Teledyne Kibra DDR User Manual

Launching Your Kibra 380 or Kibra 480 Software
1.7.1

Establish Interface

The first time you run your software, click on Setup and select Devices. You can also click
on the Analyzer Devices icon
Figure 1.11: Setting up Devices on Launching the Analyzer
The Analyzer Devices window opens displaying the connected devices. A blue shading
through the entry indicates that a device is being selected, and this device will be the one
used when you select the Update Device, Update License, or About buttons. The
checkbox indicates that this device can participate in recording traces.
Figure 1.12: Analyzer Devices Dialog
It automatically detects if the Firmware or BusEngine version needs updating and the
following screen displays.
K ibra DDR Protocol Analyzer User Manual
on the top menu bar.
Teledyne LeCroy
25