Setup - Teledyne Kibra DDR User Manual

Setup

Figure 2.3: File Menu Options
Open
Close
Save
Save as
Export
To CSV
Export
To
DDRX
Exit
2.5 Setup
The Setup menu has the following options to setup and configure the device (see
Figure 2.4 on page 36):
Each of these options are described in the following section.
K ibra DDR Protocol Analyzer User Manual
Click to open an existing trace or sample files.
Click to open an existing trace or sample files.
Click to save an existing trace or sample files.
Click to save an existing trace or sample files with a different
name or directory.
Export file in .CSV format.
Export file in .DDRX format. Export raw captured data in .DDRX
file format for offline processing. The .DDRX file format is
available to users who would like to process the signal data for
their own analysis. It is a very fast way of getting access to the
data for this purpose. The format of this file is documented in
the app note "DDRX_FileFormat.pdf", which is included in your
installation.
Click to exit the application.
Recording Options

Devices

Launch CrossSync Control Panel

Preferences

Reset Interposers

Init Phy

T eledyne LeCroy
35