Waveform View
3. Drag the cursor to select the area to zoom in as shown below.
Figure 3.11: Using the Zoom Box Mode Button
3.2.8
Context Sensitive Menu
Right‐click in the Waveform View to display the context sensitive GO to commands (see
Figure 3.11 on page 109). The commands displayed are based on where you click in both
horizontal and vertical locations on the trace. Right‐clicking on a command allows you to
go to the next command, or to go to the next command of the same type.
K ibra DDR Protocol Analyzer User Manual
Area selected to zoom in
Selected area zoomed in
T eledyne LeCroy
109