Table of Contents
Advertisement
Waveform View
Signal Names Column
Figure 3.24: Signal Names Column
Additionally, you can also do the following in the Waveform View.
Cursors
When the cursor button is pressed, you can left‐click on the Waveform view to drop the
first of a pair of cursors, then right‐click to drop the other side. The time between them is
displayed (see Figure 3.25 on page 120.)
Click on the 'x' in the cursor box to close it.
K ibra DDR Protocol Analyzer User Manual
A column of signal names is displayed on the left as shown in Figure 3.24.
Moving the Viewport Slider moves you across the view, see the Viewport Slider/
Navigation Bar section below for details.
Right‐clicking on the Label for the DIMM channel allows the user to add or
remove signals or signal groups from the waveform view.
Left‐clicking on the + symbol in each label allows the user to expand or collapse a
signal group.
Scrolling the mouse wheel will cause the waveform area to ZOOM‐In or Zoom‐
OUT.
Double‐click at a specific location to move it to the center of the screen.
Click and drag to increase
column height
Right‐click context sensitive menu
Click to hide Group
Click to view Group
T eledyne LeCroy
119
Advertisement
Table of Contents
