Teledyne LeCroy
Figure 3.9: Enabling/Disabling Zoom Box Mode
Perform the following steps to use the Zoom Box:
1. Click on the Enable/Disable Zoom Box Mode button to activate it as shown in the
2. When you move the cursor in the Waveform View display it will change to a + (Plus)
Figure 3.10: Overlaying One Signal over the Other
108
Zoom Box Mode button. When activated the button turns blue.
screen capture above.
sign.
Cursor changed to a + (Plus) sign to
zoom into an area
K ibra DDR Protocol Analyzer User Manual
Waveform View