Waveform View
Figure 3.7: Overlaying One Signal over the Other
3. Set the signal to so it overlays on the signal below as shown below.
Figure 3.8: Displaying an Overlaid Signal
3.2.7
Zoom Box
The Zoom Box mode allows you to drag your mouse around an area of the waveform and
zoom in on that particular area of the waveform. Click on the Zoom Box button
shown (see Figure 3.9 on page 108) to toggle between enabling and disabling the zoom
box mode.
K ibra DDR Protocol Analyzer User Manual
The Command Value signal is being
overlaid on the Timing Violation
signal
The Command Value overlays the
Timing Violation signal
T eledyne LeCroy
as
107