Table of Contents
Advertisement
Teledyne LeCroy
Creating Markers
You can create markers for your data in the following two ways:
1. Select Set New Marker to add a Marker to the data.
2. Right‐click anywhere in the Waveform Listing or Bank State view to add a marker.
Figure 3.22: Right-Click to Display Marker Menu Options
Note:
The menu options listed in the previous table can also be selected from the Navigation menu
option ("Navigation" on page 94.)
If the marker is not displayed on the screen, hover over the Marker bar to display a box with
the description and time stamp of the marker.
Figure 3.23: Marker Bar
118
A marker will display in the data with a default name of Marker 1.
See Figure 3.22. A marker will display in the data with a default name of Marker 1.
Waveform View
K ibra DDR Protocol Analyzer User Manual
Advertisement
Table of Contents
