Define Analysis Detail Parameters - Teledyne Kibra DDR User Manual

Teledyne LeCroy

Define Analysis Detail Parameters

The Row Usage report result is partitioned into two main sections:
Figure 3.64:
Figure 3.65: Cycle Reports Dialog
Show Detail Report
By pressing this button, the user can see the detail of the cycle intervals for the item
selected in the Cycle Report grid.
The description of input fields for the cycle reports is as follows:
Counted command: This field specifies which command type is the target for counting in
cycle.
Periodic counter reset: As mentioned before, cycle can be reset according to time
interval or by other command type.
Max allowed counted command per cycle: This field helps to find violated counts [if any
max count is selected] by counting and highlighting violated cycles in report.
146
Cycle Reports ‐ Cycle report works in periodic intervals. This interval could be

defined according to time range or cycle reset by specific command.
Commands Count Report ‐ Command counts report provides the number of

command counts per selected row(s).
Commands Count Report
Dialog
K ibra DDR Protocol Analyzer User Manual
Row Usage Report