IBM pSeries 690 Service Manual page 24

Viewing Serviceable Event Error Details: To view serviceable event error details, do the following:
1. Perform the steps in "Viewing Serviceable Event Details" on page 7.
2. Select an error in the lower table, and click Error Details.
Viewing Service Processor Error Details: To view service processor error details, do the following:
1. Perform the steps in "Viewing Serviceable Event Error Details."
2. If the serviceable event error details you are viewing are for a service processor-class error, the lower
table on the resulting window contains service processor errors. Select a service processor error from
the lower table, and click Service Processor Error Details to see further details.
Saving and Managing Extended Error Data: To save extended error (EE) data, do the following:
1. Perform the steps in "Viewing Serviceable Event Details" on page 7.
2. Click Save EE Data. To save extended error data for only one error associated with the serviceable
event (rather than for the entire serviceable event), select the error from the lower table, and click
Error Details. In the next menu, click Manage EE Data.
Viewing and Adding Serviceable Event Comments: To add comments to a serviceable event, you
must be a member of the Service Representative or System Administrator roles.
To add comments to a serviceable event, do the following:
Note: You cannot edit or delete previous comments.
1. Perform the steps in "Viewing Serviceable Event Details" on page 7.
2. Select the error to which you want to add comments to and click Comments. If you want to close the
event and add comments, click Close Event from this window. The Serviceable Event Comments
window opens.
3. Type your name and add comments as appropriate. You can also review previous comments, but you
cannot edit this information.
4. If you clicked Comments on the Serviceable Event Details window, clicking OK commits your entry
and returns you to the Serviceable Event Details window.
If you clicked Close Event on the Serviceable Event Details window, clicking OK commits all changes and
opens the Update FRU Information window. For more information about updating field replaceable unit
information, see "Updating Field Replaceable Unit (FRU) Information."
Closing a Serviceable Event: To close a serviceable event, do the following:
1. Perform the steps in "Viewing Serviceable Event Details" on page 7.
2. Click Close Event from this window. The Serviceable Event Comments window opens.
3. Click OK to commit your comments. The Update FRU Information window displays. See "Updating
Field Replaceable Unit (FRU) Information" for information on completing this window. Click OK on the
Update FRU Information window to close the serviceable event.
Note: You must close a serviceable event after it has been serviced to ensure that if a similar error is
reported later, it is called home. If an old problem remains open, the new similar problem is
reported as a duplicate. Duplicate errors are neither reported nor called home to a service
center. Close a serviceable event when the partition that reports the error is active. Closing the
event causes the new status of the serviceable event to be correctly sent to the partition.
Updating Field Replaceable Unit (FRU) Information: This task allows you to update the FRU
information you changed or modified as a result of this serviceable event. From this panel, you can also
activate and deactivate LEDs and search for other serviceable events that contain the same FRU entries.
To update FRU information, do the following:
8 Eserver pSeries 690 Service Guide