IBM pSeries 690 Service Manual page 209

Hide thumbs Also See for pSeries 690:

Table of Contents

Step 1422-11

Insert a new adapter of the same type recorded in "Step 1422-1" on page 191 into the slot assigned in

"Step 1422-10" on page 192.

Step 1422-12

Move any external cabling from the adapter in the slot recorded in "Step 1422-1" on page 191 to the

adapter in the slot assigned in "Step 1422-10" on page 192.

Step 1422-13

Attempt to boot the partition.

Does the partition boot?.

Go to "Step 1422-14."

Partition and all resources are operational. Schedule repair with the customer for the slot recorded

in "Step 1422-1" on page 191. Go to "MAP 0410: Repair Checkout" in the RS/6000 and Eserver

pSeries Diagnostic Information for Multiple Bus Systems. This ends the procedure.

Step 1422-14

You cannot repair the adapter without powering off the entire system. Schedule repair with the customer

for the slot recorded in "Step 1422-1" on page 191. This ends the procedure.

Chapter 3. Maintenance Analysis Procedures