Restore Default Settings; Multiboot Startup; Exiting System Management Services - IBM pSeries 690 Service Manual

Restore Default Settings

This option restores the boot list to the default boot list. The default boot list will vary depending on the
devices that are installed in the system.
The default boot list is as follows:
1. Primary diskette drive (if installed)
2. CD-ROM drive (if installed)
3. Tape drive (if installed)
4. Hard disk drive (if installed)
5. Network adapter

Multiboot Startup

Multiboot Startup toggles the multiboot startup flag, which controls whether the multiboot menu is invoked
automatically on startup.

Exiting System Management Services

After you have finished using the system management services, type x (for exit) to boot your system or
partition.
850 Eserver pSeries 690 Service Guide