IBM pSeries 690 Service Manual page 830

Call-Out Policy Setup Menu
Note: Call-out is disabled in partitioned systems.
Call out settings can be set using the following menu:
CALL-OUT POLICY SETUP MENU
1. Call-Out policy (First/All):
Currently First
2. Remote timeout, (in seconds):
Currently 120
3. Remote latency, (in seconds):
Currently 2
4. Number of retries:
Currently 2
98. Return to Previous Menu
0>
v Call-Out policy can be set to first or all. If call-out policy is set to first, the service processor stops
at the first successful call-out to one of the following numbers in the order listed:
1. Service Center
2. Customer Administrative Center
3. Pager
If call-out policy is set to all, the service processor attempts a call-out to all of the following numbers in
the order listed:
1. Service Center
2. Customer Administrative Center
3. Pager
v Remote timeout and remote latency are functions of your service provider's catcher computer. Either
use the defaults or contact your service provider for recommended settings.
v Number of retries is the number of times you want the server to retry calls that failed to complete.
814 Eserver pSeries 690 Service Guide