IBM pSeries 690 Service Manual page 769

Error Code Description
B1xx 4608 Service processor early termination
B1xx 460A Time-of-day clock has been reset
B1xx 460B NVRAM/Time-of-day battery
B1xx 4611 Service processor failure
B1xx 4612 Service processor firmware failure
B1xx 4613 Service processor failure
B1xx 4614 Service processor failure related to processor
subsystem
B1xx 4620 Modem configuration failure
B1xx 4621 Modem disconnection failure
B1xx 4622 Service processor failure
Action: This code may be informational, or it may indicate a failure in the service processor.
Before changing any parts, examine word 13 in the service processor error log entry, or bytes 68
and 69 in the AIX error log entry. For detailed instructions on finding word 13 in the service
processor error log entry, or bytes 68 and 69 in the AIX error log entry, refer to error code B1xx
4699.
If the error code (word 11 value) is B19F4622, and the word 13 value is 230Axxxx, this is an
informational message. No action is required by the customer or service representative.
For all other values of word 11 and word 13:
1. Operator panel, location: U1.17-L1
2. Check for system firmware updates. Apply if available.
3. Primary I/O book, location: U1.18-P1-H2.
Action/
Possible Failing FRU
1. Reset the system by removing, then
reapplying power to the processor
subsystem.
2. Reflash system firmware.
3. Primary I/O book
Location: U1.18-P1-H2
1. Set time-of-day clock
2. Replace Primary I/O book
Location: U1.18-P1-H2
Replace battery
Location: U1.18-P1-H2-V1
1. Reboot the system in slow mode to isolate
the problem in the processor subsystem.
2. Primary I/O book
Location: U1.18-P1-H2
1. Check for system firmware updates.
2. Primary I/O book
Location: U1.18-P1-H2
Primary I/O book
Location: U1.18-P1-H2
Reboot the system in slow mode to isolate the
problem in the processor subsystem.
1. Check modem configuration files.
2. Check for system firmware updates.
3. Modem and modem cable.
4. Primary I/O book
Location: U1.18-P1-H2
1. Check modem configuration files.
2. Check for system firmware updates.
3. Modem and modem cable.
4. Primary I/O book
Location: U1.18-P1-H2
Chapter 5. Error Code to FRU Index
753