IBM pSeries 690 Service Manual page 100

FRU Name
I/O Book 2, Port 10 Connector 1 (2-1)
Cable 3, see "I/O Subsystems (5 and 6)
RIO Cabling to the Secondary I/O Book,
Two I/O Planar Loop Configuration, 3 or
4 MCMs Only" on page 46 for cable
connections.
I/O Book 2, Port 10 Connector 0 (2-0)
(A0)
I/O Book 2, Port 10 Connector 0 (2-0)
Cable 4, see "I/O Subsystems (5 and 6)
RIO Cabling to the Secondary I/O Book,
Two I/O Planar Loop Configuration, 3 or
4 MCMs Only" on page 46 for cable
connections.
I/O Book 2, Port 5 Connector 3 (1-1) (D1) U1.18-P1-H3/Q5
I/O Book 2, Port 5 Connector 3 (1-1)
Cable 5, see "I/O Subsystems (1 Through
4 without IBFs) RIO Cabling to I/O
Books, Two I/O Planar Loop
Configuration, 2, 3, or 4 MCMs Only" on
page 45 for cable connections.
I/O Book 2, Port 5 Connector 2 (1-0) (D0) U1.18-P1-H3/Q6
I/O Book 2, Port 5 Connector 2 (1-0)
Cable 6, see "I/O Subsystems (1 Through
4 without IBFs) RIO Cabling to I/O
Books, Two I/O Planar Loop
Configuration, 2, 3, or 4 MCMs Only" on
page 45 for cable connections.
I/O Book 2, Port 4 Connector 1 (2-1) (C1) U1.18-P1-H3/Q7
I/O Book 2, Port 4 Connector 1 (2-1)
Cable 7, see "I/O Subsystems (1 Through
4 without IBFs) RIO Cabling to I/O
Books, Two I/O Planar Loop
Configuration, 2, 3, or 4 MCMs Only" on
page 45 for cable connections.
I/O Book 2, Port 4 Connector 0 (2-0) (C0) U1.18-P1-H3/Q8
I/O Book 2, Port 4 Connector 1 (2-0)
Cable 8 , see "I/O Subsystems (1
Through 4 without IBFs) RIO Cabling to
I/O Books, Two I/O Planar Loop
Configuration, 2, 3, or 4 MCMs Only" on
page 45 for cable connections.
I/O Book 3 or SNI Adapter Book- Slot 3
Note: This slot may have either a
secondary I/O adapter book or an SNI
adapter book for the High Performance
Switch. If there is an SNI adapter in
U1.18-P1-H4, go to "SNI Adapter for
High Performance Switch" on page 85
I/O Book 3, Port 12 Connector 2 (1-0)
(C0)
84 Eserver pSeries 690 Service Guide
Location
Code
U1.18-P1-H3/Q3#
U1.18-P1-H3/Q4
U1.18-P1-H3/Q4#
U1.18-P1-H3/Q5#
U1.18-P1-H3/Q6#
U1.18-P1-H3/Q7#
U1.18-P1-H3/Q8#
U1.18-P1-H4
U1.18-P1-H4/Q1
AIX Physical
Location Connection
Code
Logical
Connection