IBM pSeries 690 Service Manual page 671

Error Code Description
406E 0B03 Scan control routines detected fault in I/O book
(slot 0 RIO port 3)
406E 0B10 Processor subsystem tests detected fault in SNI
adapter
406E 0B11 Processor subsystem tests detected fault in SNI
adapter
406E 0B12 Processor subsystem tests detected fault in SNI
adapter
406E 0B13 Processor subsystem tests detected fault in SNI
adapter
406E 0B20 Scan control routines detected fault in I/O book
406E 0B21 Scan control routines detected fault in I/O book
Action/
Possible Failing FRU
1. Check for system firmware updates.
2. Check the I/O cabling between the primary
I/O book and the I/O subsystems.
3. Primary I/O book
Location: U1.18-P1-H2
4. Call service support.
1. Check for system firmware updates.
2. Check the cabling between the SNI adapter
book and the High Performance Switch.
3. SNI adapter book
Location: U1.18-P1-H1
4. Call service support.
1. Check for system firmware updates.
2. Check the cabling between the SNI adapter
book and the High Performance Switch.
3. SNI adapter book
Location: U1.18-P1-H1
4. Call service support.
1. Check for system firmware updates.
2. Check the cabling between the SNI adapter
book and the High Performance Switch.
3. SNI adapter book
Location: U1.18-P1-H1
4. Call service support.
1. Check for system firmware updates.
2. Check the cabling between the SNI adapter
book and the High Performance Switch.
3. SNI adapter book
Location: U1.18-P1-H1
4. Call service support.
1. Check for system firmware updates.
2. Check the I/O cabling between the
secondary I/O book and the I/O
subsystems.
3. Secondary I/O book
Location: U1.18-P1-H3
4. Call service support.
1. Check for system firmware updates.
2. Check the I/O cabling between the
secondary I/O book and the I/O
subsystems.
3. Secondary I/O book
Location: U1.18-P1-H3
4. Call service support.
Chapter 5. Error Code to FRU Index
655