IBM pSeries 690 Service Manual page 807

Scan Log Dump Setup Menu
1. Scan Log Dump Policy:
Currently As Needed
2. Scan Log Dump Content:
Currently As Requested
3. Immediate Dump
98. Return to Previous Menu
0>1
Select from the following options:
(As Needed=2, Always=3)
Enter New Option:
0>1
The scan log dump policy can be set to the following:
2=As Needed
The processor run-time diagnostics record the dump data base on the error type. This is the
default value.
3=Always
Selecting this option allows the service processor to record a scan log dump for all error types.
The scan log dump policy can also be set from the Tasks menu in the AIX service aids.
Option 2 displays the following screen:
Scan Log Dump Setup Menu
1. Scan Log Dump Policy:
Currently As Needed
2. Scan Log Dump Content:
Currently As Requested
3. Immediate Dump
98. Return to Previous Menu
0>2
Select from the following options:
(As Requested=1, Optimum=2, Complete=3, Minimum=4))
Enter New Option:
0>0
The scan log dump content can be set to the following:
1 = As needed
The processor run-time diagnostics will select the the contents of the dump file based on the
type of error that occurs. This is the default value.
2 = Optimum
The dump will include the smallest amount of information possible (a minimum number of
hardware scan log rings).
3 = Complete
The dump will include as much information as possible to allow the complete analysis of
hardware and software errors.
4 = Minimum
The dump will include the smallest amount of information possible (a minimum number of
hardware scan log rings).
Chapter 7. Using the Service Processor
791