Yamaha Waverunner FX 160 Service Manual page 86

Hide thumbs Also See for Waverunner FX 160:

Table of Contents

Õ Bundle the cooling water hose (cylinder head

cover to thermostat) and cooling water hose (star-

board cooling water pilot outlet), and then fasten

them with a plastic tie to the oil tank boss. When

bundling the hoses, make sure that the cooling

water hose (cylinder head cover to thermostat) is

routed on the deck side and that the cooling water

hose (starboard cooling water pilot outlet) is

routed on the engine side.

Ö Insert the cooling water hose to the paint mark.

CABLE AND HOSE ROUTING

× Fasten the end of the cooling water hose tube

that is contacting the hose joint with a plastic tie.

Ø Cooling water passage